Author [NL] [FR] [ES] [DE] [SE] [IT] Topic: Seals on the gear lever linkage  (Read 5328 times)

0 Members and 1 Guest are viewing this topic.

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
    • Topic Author

    Offline earthman

    • Trophy Master
    • ****
    • Topic Author
    • Posts: 2121
    • Country: gb
    Seals on the gear lever linkage
    on: Oct 17, 2020, 08.58 pm
    Oct 17, 2020, 08.58 pm


    I'm guessing that these are number 5 on here https://www.worldoftriumph.com/collections/100061481-0-2?type=trophy-1215-se

    Anyone else had to buy/fit them to their Trophy?

  • Offline trophied   us

    • Trophy God  ‐    4776
    • *****
      #1

    Offline trophied

    • Trophy God
    • *****
    • Posts: 4776
    • Bike: 2013 Trophy SE
    • City / Town: New Braunfels, Tx
    • Country: us
    Re: Seals on the gear lever linkage
    Reply #1 on: Oct 18, 2020, 12.32 am
    Oct 18, 2020, 12.32 am
    Yep!  The little spring clip keeper on the linkage catches them and tears them.  I consider them to be almost like a consumable part that needs replacing at every service. :009:
    One of the Founding Members of the Twisted Trophies

  • Offline Noggin   gb

    • Trophy Member  ‐    98
    • **
      #2

    Offline Noggin

    • Trophy Member
    • **
    • Posts: 98
    • Bike: 13 plate Trophy SE
    • City / Town: Southampton
    • Country: gb
    Re: Seals on the gear lever linkage
    Reply #2 on: Oct 18, 2020, 11.20 am
    Oct 18, 2020, 11.20 am
    Not sure if any help but darn site cheaper then triumphs offering

    https://www.hilltop-products.co.uk/neoprene-sponge-cord.html

    Just needs a home in the centre
    Various bikes, then I grew up !
    1991 Triumph Trophy 1200
    2010 Triumph Sprint GT
    2013 Triumph Trophy 1215

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
    • Topic Author
    • #3

    Offline earthman

    • Trophy Master
    • ****
    • Topic Author
    • Posts: 2121
    • Country: gb
    Re: Seals on the gear lever linkage
    Reply #3 on: Oct 18, 2020, 12.58 pm
    Oct 18, 2020, 12.58 pm
    *Originally Posted by trophied [+]
    Yep!  The little spring clip keeper on the linkage catches them and tears them.  I consider them to be almost like a consumable part that needs replacing at every service. :009:

    Do you pop the the ball out of the socket to replace them then? The hole in these seals go over the ball part??

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
    • Topic Author
    • #4

    Offline earthman

    • Trophy Master
    • ****
    • Topic Author
    • Posts: 2121
    • Country: gb
    Re: Seals on the gear lever linkage
    Reply #4 on: Oct 18, 2020, 12.59 pm
    Oct 18, 2020, 12.59 pm
    *Originally Posted by Noggin [+]
    Not sure if any help but darn site cheaper then triumphs offering

    https://www.hilltop-products.co.uk/neoprene-sponge-cord.html

    Just needs a home in the centre

    Thanks, looks like that could be an option worth looking into. :028:

  • Offline 1675   gb

    • Trophy Master  ‐    941
    • ****
      #5

    Offline 1675

    • Trophy Master
    • ****
    • Posts: 941
    • Bike: Trophy
    • City / Town: Spennymoor
    • Country: gb
    Re: Seals on the gear lever linkage
    Reply #5 on: Oct 19, 2020, 09.49 am
    Oct 19, 2020, 09.49 am
    There is a small "clip" which goes through the joint, keeping the ball in place. The assembly can be dismantled for cleaning and lubricating. Yes, the seal goes over the ball part. From memory, I think these seals are 8 each!

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
    • Topic Author
    • #6

    Offline earthman

    • Trophy Master
    • ****
    • Topic Author
    • Posts: 2121
    • Country: gb
    Re: Seals on the gear lever linkage
    Reply #6 on: Oct 19, 2020, 07.58 pm
    Oct 19, 2020, 07.58 pm
    Thanks 1675 for confirming where they sit, I know about the clips, never actually pulled them out before though. Yes, I've seen that Triumph want that sort of money for them,......jokers hey. :233:

  • Offline trophied   us

    • Trophy God  ‐    4776
    • *****
      #7

    Offline trophied

    • Trophy God
    • *****
    • Posts: 4776
    • Bike: 2013 Trophy SE
    • City / Town: New Braunfels, Tx
    • Country: us
    Re: Seals on the gear lever linkage
    Reply #7 on: Oct 19, 2020, 09.48 pm
    Oct 19, 2020, 09.48 pm
    Next time I service my linkage I'm going to the fabric store and buying some felt and using my plug cutters and hole punch to make my own! :745:  I might even make a really thin flat plastic cover on the clip side to keep it from tearing up the felt seal.
    One of the Founding Members of the Twisted Trophies