Author [NL] [FR] [ES] [DE] [SE] [IT] loose rear fender  (Read 1408 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Longridz

    • Trophy Member  ‐    18
    • **
    • Topic Author

    Offline Longridz

    • Trophy Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: 2015 trophy
    • City / Town: virginia
    loose rear fender
    on: Oct 19, 2020, 07.25 pm
    Oct 19, 2020, 07.25 pm
    I just noticed My rear fender and tail light assembly is loose.  Is this a normal thing or something I should be doing?

  • Offline Novocastrian   gb

    • Trophy Master  ‐    697
    • ****
      #1

    Offline Novocastrian

    • Trophy Master
    • ****
    • Posts: 697
    • Bike: TTSE
    • City / Town: Tynemouth
    • Country: gb
    Re: loose rear fender
    Reply #1 on: Oct 19, 2020, 07.45 pm
    Oct 19, 2020, 07.45 pm
    Have you checked the nut under the seat that holds the tail light unit in place?
    Ken Hastie
    TTSE, a handful of BSAs, a Vespa 300 and an MGB

  • Offline Longridz

    • Trophy Member  ‐    18
    • **
    • Topic Author
    • #2

    Offline Longridz

    • Trophy Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: 2015 trophy
    • City / Town: virginia
    Re: loose rear fender
    Reply #2 on: Oct 19, 2020, 10.14 pm
    Oct 19, 2020, 10.14 pm
    I have not, was not aware of this even being there

  • Offline Coconut   gb

    • Trophy God  ‐    10131
    • *****
      #3

    Offline Coconut

    • Trophy God
    • *****
    • Posts: 10131
    • Bike: 2017 Trophy SE
    • City / Town: South Birmingham
    • Country: gb
    Re: loose rear fender
    Reply #3 on: Oct 20, 2020, 06.59 am
    Oct 20, 2020, 06.59 am
    There’s a single long thin threaded section from the back of the
    Rear Light Unit that emerges centrally under the pillion seat.

    It is ( or should be ) secured with a white nylon nut,
    which can be seen in the below Photo, and has a small silver "P-Clip"
    preventing the nut from vibrating loose. I've tied a short wire onto
    my "P-Clip", attached to the bodywork, as it is easily dropped and lost !



    This only secures the rear light unit onto the bike though
    and does not have any effect on the security of the rear
    panels or fender.



    bill
    Last Edit: Oct 20, 2020, 07.30 am by Coconut

  • Offline Longridz

    • Trophy Member  ‐    18
    • **
    • Topic Author
    • #4

    Offline Longridz

    • Trophy Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: 2015 trophy
    • City / Town: virginia
    Re: loose rear fender
    Reply #4 on: Oct 21, 2020, 07.17 pm
    Oct 21, 2020, 07.17 pm
    Thanks for that. I checked and that is secure. Just still moves. I wonder if it like the panier bags.  Moves with turns or bumps so it doesn’t affect or feel thru the frame

  • Offline Coconut   gb

    • Trophy God  ‐    10131
    • *****
      #5

    Offline Coconut

    • Trophy God
    • *****
    • Posts: 10131
    • Bike: 2017 Trophy SE
    • City / Town: South Birmingham
    • Country: gb
    Re: loose rear fender
    Reply #5 on: Oct 21, 2020, 09.26 pm
    Oct 21, 2020, 09.26 pm
    I wonder if it like the panier bags.  Moves with turns or bumps ....

    No, it shouldn't do that !

    Completely remove the rear Light Unit by releasing that white nylon nut shown in
    the previous Photo, and then withdrawing the Light Unit to the rear of the bike.

    Unplug the wiring socket from the harness by depressing the latch on the side of the connector.

    Check that these Bolts are present and tight :

    2 bolts at the rear of the bike ( after removal of the Rear Light Unit ) :




    2 bolts inside the Rear Wheel arch ( Remove the Panniers ) - 1 bolt on each side :



    I suspect that some or all of those bolts ( and maybe others too ) are either loose or missing !

    Cheers  :821:




  • Offline Longridz

    • Trophy Member  ‐    18
    • **
    • Topic Author
    • #6

    Offline Longridz

    • Trophy Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: 2015 trophy
    • City / Town: virginia
    Re: loose rear fender
    Reply #6 on: Oct 26, 2020, 07.16 pm
    Oct 26, 2020, 07.16 pm
    thanks coconut.  Im checking this weekend.  I ride it a lot so im sure stuff loosened up.  I have almost 34000miles on my 2017 ttse

     



    tweedy-bunch