Author [NL] [FR] [ES] [DE] [SE] [IT] Topic: Final drive oil amount  (Read 4279 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Longridz

    • Trophy Member  ‐    18
    • **
    • Topic Author

    Offline Longridz

    • Trophy Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: 2015 trophy
    • City / Town: virginia
    Final drive oil amount
    on: Oct 26, 2020, 07.08 pm
    Oct 26, 2020, 07.08 pm
    Does anyone have the specs for the exact amount of Final drive oil?  Or is it just fill it until it reaches the bottom of the fill hole?

  • Offline tdragger   us

    • Trophy Master  ‐    584
    • ****
      #1

    Offline tdragger

    • Trophy Master
    • ****
    • Posts: 584
    • Bike: 2015 Trophy SE
    • City / Town: Fredericksburg
    • Country: us
    Re: Final drive oil amount
    Reply #1 on: Oct 26, 2020, 07.54 pm
    Oct 26, 2020, 07.54 pm
    fill to bottom of fill hole.  It's not very much.
    -------------------------------------
    15 Triumph Trophy SE (2019 IBR)
    16 Triumph Trophy SE (2021 IBR)
    IBA #609

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
      #2

    Offline earthman

    • Trophy Master
    • ****
    • Posts: 2121
    • Country: gb
    Re: Final drive oil amount
    Reply #2 on: Oct 26, 2020, 09.34 pm
    Oct 26, 2020, 09.34 pm
    Aye, it is a small amount, I'm changing mine every year, one 1L bottle would last you a good few years. :002:

    My advice is to go and make a cup of tea once you do have oil coming out of that hole, if you just bung the plug straight back in, it maybe over filled, resulting in higher pressure/oil passing the seal once the bike is on the road. 

  • Offline rpeters549   us

    • Trophy Master  ‐    750
    • ****
      #3

    Offline rpeters549

    • Trophy Master
    • ****
    • Posts: 750
    • Bike: 2015 Trophy SE
    • City / Town: Lowell, Or
    • Country: us
    Re: Final drive oil amount
    Reply #3 on: Oct 28, 2020, 12.55 am
    Oct 28, 2020, 12.55 am
    If memory serves it is less than 8 ounces so a quart bottle of good stuff will last a long time.
    Factory says change once and never again. I will be doing mine at 20k intervals. Too inexpensive of maintenance not to.
    Year round rider here!

  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
      #4

    Offline earthman

    • Trophy Master
    • ****
    • Posts: 2121
    • Country: gb
    Re: Final drive oil amount
    Reply #4 on: Oct 28, 2020, 08.00 am
    Oct 28, 2020, 08.00 am
    It's a no brainer really, to replace this oil fairly regularly shall we say, it's easy to do, drain and fill plugs have both been fitted after all.

    I don't often disagree with the workshop manual but on this I do,.....apart from them hoping that you will be ordering an whole new driver shaft in the future, I can't see why they say only change it once.

  • Offline Coconut   gb

    • Trophy God  ‐    9994
    • *****
      #5

    Offline Coconut

    • Trophy God
    • *****
    • Posts: 9994
    • Bike: 2017 Trophy SE
    • City / Town: South Birmingham
    • Country: gb
    Re: Final drive oil amount
    Reply #5 on: Oct 28, 2020, 08.42 am
    Oct 28, 2020, 08.42 am
    To answer the original questions :

    Does anyone have the specs for the exact amount of Final drive oil?

    Assuming the Service Manual is correct : 0.17 Litres, which is 5.75 US Fluid Ounces.

    There is a previous Topic where a Member reports "filling" with 0.24 Litres ! :

    Change final drive oil.


    Or is it just fill it until it reaches the bottom of the fill hole?

    YES ! - If you've drained the Oil so it can be changed for fresh Oil,
    there will always be some left inside that doesn't drain out,
    so if the total specified was added, it would be over-filled.

    The bike should be on level ground, with the rear wheel off the gorund ( such as on the Centre Stand )
    and the Oil filled ( or topped up ) until it is level with the bottom of the filler hole.

    Cheers  :821:


  • Offline earthman   gb

    • Trophy Master  ‐    2121
    • ****
      #6

    Offline earthman

    • Trophy Master
    • ****
    • Posts: 2121
    • Country: gb
    Re: Final drive oil amount
    Reply #6 on: Oct 28, 2020, 11.17 am
    Oct 28, 2020, 11.17 am
    I suspect that the techs at the dealerships just bung the refill plug back in as soon as they see the oil overflowing, they just don't have the time to wait for it to stop dripping.
    Mine had been overfilled, pressure builds up at speed and I ended up with oil on my drive afterwards. Not had any problems since I give it a good half hour before putting the plug back in.

     



    tweedy-bunch