Author [NL] [FR] [ES] [DE] [SE] [IT] Topic: Rear Wheel Studs - Dimensions & Alternative ?  (Read 6564 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Coconut   gb

    • Trophy God  ‐    9752
    • *****
    • Topic Author

    Offline Coconut

    • Trophy God
    • *****
    • Topic Author
    • Posts: 9752
    • Country: gb
    • Bike: 2017 Trophy SE
    • City / Town: South Birmingham
    Rear Wheel Studs - Dimensions & Alternative ?
    on: Nov 29, 2020, 11.55 am
    Nov 29, 2020, 11.55 am
    I took my rear wheel off recently for cleaning.

    One of the Studs was corroded onto the Wheel Nut,
    and the Stud unscrewed from the Final Drive Unit !

    It was easy enough to remove the Stud from the Nut -
    a little WD40, gripped the plain section in a vice, then unscrewed it.

    I have since re-fitted it to the Final Drive Unit
    after applying some Hylogrip HY2170 Thread Locking compound
    to the end that screws into the Final Drive Unit.

    While the Stud was out, having recalled that another Member had
    difficulty finding replacements, after he found SHEARED Studs on his Trophy,
    I took the opportunity to measure them - as in the below Image.

    I haven't yet found anyone that supplies these Studs.
    ( Please let me know if YOU do ! ).

    Hopefully the measurements will help anyone that needs to have some made.



    Cheers  :821:


    Last Edit: Dec 11, 2020, 08.10 pm by Coconut

  • Offline Rick505   us

    • Trophy Pro  ‐    304
    • ***
      #1

    Offline Rick505

    • Trophy Pro
    • ***
    • Posts: 304
    • Country: us
    • Bike: 2015 Trophy SE
    • City / Town: Albuquerque, NM
    Re: Rear Wheel Studs - Dimensions
    Reply #1 on: Nov 29, 2020, 03.07 pm
    Nov 29, 2020, 03.07 pm
    This is the closest I've found looking at the usual suspects:

    https://www.mcmaster.com/93275A039/

  • Offline Coconut   gb

    • Trophy God  ‐    9752
    • *****
    • Topic Author
    • #2

    Offline Coconut

    • Trophy God
    • *****
    • Topic Author
    • Posts: 9752
    • Country: gb
    • Bike: 2017 Trophy SE
    • City / Town: South Birmingham
    Re: Rear Wheel Studs - Dimensions
    Reply #2 on: Nov 29, 2020, 04.36 pm
    Nov 29, 2020, 04.36 pm
    The problem with those is that although they will screw into the Final Drive Unit,
    the Wheel Nuts won't fit onto them as they are the same thread on both ends,
    ( M10 x 1.5 ) whereas the Trophy Studs have different threads ( M10 x1.5 & M10 x 1.25 )

    If you did use one of those, you would also need an M10 x 1.5 pitch Wheel Nut ( 60 Deg. taper ),
    and that will probably have a different size Hex head than the standard Trophy Wheel Nuts too.  :087:






  • Offline Rick505   us

    • Trophy Pro  ‐    304
    • ***
      #3

    Offline Rick505

    • Trophy Pro
    • ***
    • Posts: 304
    • Country: us
    • Bike: 2015 Trophy SE
    • City / Town: Albuquerque, NM
    Re: Rear Wheel Studs - Dimensions
    Reply #3 on: Nov 29, 2020, 07.53 pm
    Nov 29, 2020, 07.53 pm
    I see that now.  That's what I get when I reply and feel all smug with myself thinking I found the answer.   :431: :034:

  • Offline STJIM

    • Trophy Pro  ‐    341
    • ***
      #4

    Offline STJIM

    • Trophy Pro
    • ***
    • Posts: 341
    • Bike: 2015 TTSE ( Blue )
    • City / Town: West Michigan
    Re: Rear Wheel Studs - Dimensions
    Reply #4 on: Nov 29, 2020, 09.01 pm
    Nov 29, 2020, 09.01 pm
    Thanks for that info Coconut.

    i think I'll remove the rear wheel mounting nuts one at a time and apply some copper anti-seize to the threads.  I know any kind of lube, etc. isn't recommended on wheel studs , but I have been lubing wheel studs on my cars and motorcycles for the past 30 years and haven't had a problem with any of them loosening up.
    IBA #35372
    BBG  5-2014 ; SS3K 9-2020
    Great Lakes 100 :  2011 & 2019
    2015 TTSE , 2008 Concours C-14
    1998 ST1100

  • Offline STJIM

    • Trophy Pro  ‐    341
    • ***
      #5

    Offline STJIM

    • Trophy Pro
    • ***
    • Posts: 341
    • Bike: 2015 TTSE ( Blue )
    • City / Town: West Michigan
    Re: Rear Wheel Studs - Dimensions
    Reply #5 on: Nov 29, 2020, 09.08 pm
    Nov 29, 2020, 09.08 pm
    Rick:

    I use to go to McMaster-Carr first for bolts & nuts, etc.  but then found Bolt Depot and have been happy with their bolt & nut selection, prices and service.  I still deal with McMaster-Carr for other stuff, tho.

    Check it out :  https://www.boltdepot.com/
    Last Edit: Nov 29, 2020, 09.18 pm by STJIM
    IBA #35372
    BBG  5-2014 ; SS3K 9-2020
    Great Lakes 100 :  2011 & 2019
    2015 TTSE , 2008 Concours C-14
    1998 ST1100

  • Offline trophied   us

    • Trophy God  ‐    4752
    • *****
      #6

    Offline trophied

    • Trophy God
    • *****
    • Posts: 4752
    • Country: us
    • Bike: 2013 Trophy SE
    • City / Town: New Braunfels, Tx
    Re: Rear Wheel Studs - Dimensions
    Reply #6 on: Nov 29, 2020, 10.08 pm
    Nov 29, 2020, 10.08 pm
    I did find exhaust manifold studs the right thread pitch each end, but not sure about the strength.  No rating listed on them, and dimensionally not an exact match on the lenth either.
    One of the Founding Members of the Twisted Trophies

  • Offline HACKLE   au

    • Trophy Master  ‐    1223
    • ****
      #7

    Offline HACKLE

    • Trophy Master
    • ****
    • Posts: 1223
    • Country: au
    • Bike: 2016 Trophy 1200se
    • City / Town: Trafalgar
    Re: Rear Wheel Studs - Dimensions
    Reply #7 on: Nov 29, 2020, 11.30 pm
    Nov 29, 2020, 11.30 pm
    Coconut, once again, thanks.  :821: :028:
    HACKLE     I'm too young to be this old.

    FarRider  #379

    IBA Member  #58060