Kuryakyn passenger peg adaptor

[Stephane]

Does anyone know which Kuryakyn passenger peg adaptors fit the TTSE?
Their site does not mention the Trophy, but does other Triumph models. Are they all the same size by any chance (since they're the same brand)?
I have Kuryakyn passenger mini-floorboards that my wife loved on the FJR.
For those who don't know, Kuryakyn's pegs all use adaptors so they can be fitted to many bike.
Thanks

For reference:
https://www.kuryakyn.com/products/6653/splined-peg-adapters-for-triumph

[dietDrThunder]

I don't know the answer, but you can get them on Amazon and have an easy path to return if need be.

[Stephane]

Oh, I didn't know they were on Amazon. That's a good suggestion

[Stephane]

For the benefit of others, I'm confirming that I was able to use the Splined Adaptors part # 8818.
It's not a perfect fit, but the 2 adjustment screws will prevent any wobbling. There is also a sleeve you can take out to use the Trophy's 1/4" peg bolt.

[Coconut]

Can you explain what you mean by the "Trophy's 1/4" peg bolt" ?

The Front and Rear Trophy footrests are held in place with an 8mm Pivot pin and circlip.

There are no bolts securing the Footrests,
and I am not aware of any Imperial size bolts used on the Trophy,
they are all ( AFAIAA ) Metric sizes ?

Cheers 

[Stephane]

You are correct. I didn't know what to call it.
I'd update my previous post, but I don't think I can.

[dietDrThunder]

On a side note, if you fit the mini floorboards, those present an excelle ny playfirm ulon which to moint a large thermal jug for drinkin'on the road.

[dandrumheller]

Originally Posted by dietDrThunder

On a side note, if you fit the mini floorboards, those present an excelle ny playfirm ulon which to moint a large thermal jug for drinkin'on the road.

*hic*