Success! Tail lights sub-harness

[Stephane]

Today I installed a SubaBrake II brake Modulator (I'd kept it from my previous bike).
The wire colours don't all match the Trophy's tail harness so I'm posting here for others. It could be useful for any project involving the tail harness.
Following are the pictures & screenshots.
(I got some info from others posts here of course).
You may need to zoom in. Some pictures I don't have the connector yet, just the pins because it shows the wires better.






This last screenshot is for the SupaBrake. There are 10 wires but they only list the ones related to the brake light.

Although it's elsewhere on this forum, I'll repeat that the connectors are available from Ballenger Motorsports; parts
CONN-75822 & CONN-75823

Salut,
Stéphane

[digital]

Good work, thanks for sharing. 

[Yaga1973]

Beautiful work and thank you for sharing the diagrams and the connectors needed.  This will definitely help me with one of my projects!

[Dinty]

   What a great share. Thanks for taking the time. I wonder if you or anyone else might be able to help me in a similar project. I am determined to add a 2nd tail /running/brake light to my Topbox. As you know there is a live charging outlet which I would like to keep functional as I'm thinking it could charge my laptop on longer rides.
  So I know I'll have to surface mount the wiring inside the trunk but I can use clips and keep it neat. . So I already have power and ground @ the existing outlet. I need to tap into the brake line and bring it up into the box. Can anyone tell me definitively which wire that is and where is the best place to tap it neat the top box?  I  would also ask if anyone has a  "strobe device they can recommend?  Thanks as always Don from Boston

[Stephane]

The brake wire is green with a purple line.
The brake modulator I'm using is SupaBrake. It's a bit expensive but it works well because it doesn't strobe continuously.
I have definitely read an older post about someone doing the same project as you. Be sure to search on the forum.

[digital]

 leave the requested information:

Female connector


Male connector embedded in TopCase


Male and female air connector


Female air connector plugged into the male connector of the TopCase


Various examples of right and left position, brake and turn signal light
















As you can see, I also added led turn lights to the saddlebags


Here you can see the wire colors of all the connections needed to make the connections:
https://www.triumph-trophy.com/index.php/topic,10153.0.html

Later I will leave you some videos to see how it works.

[digital]