Display Changes

[AZRider]

The Trophy is a great bike.  I just wish the display feature was easier to use or I was younger.   I was trying to change the Headlight setting under Adjustments.  My SELECT button maybe is bad.  I had a terrible time getting the display to display the items under Adjustment.  Finally, I got to the Adjustments screen and thought I was going to easily get to Headlights.  I SCOLLED down and it went through the menu until I got to Headlight.  It would not bring up Headlight and instead went to the top  to start over again.  I tried several times.  What am I doing wrong?
Thank you in advance.

[digital]

Hello,
Just from memory, I think I remember that you have to do it with the engine running so that the headlights stay on. If you do it with only the ignition on, you will see that in the submenu, it says lighthouse, but it does not allow entry, it obviously jumps up or down. Please check with the engine running and comment on the result.

[Novocastrian]

Originally Posted by AZRider

The Trophy is a great bike.  I just wish the display feature was easier to use or I was younger.   I was trying to change the Headlight setting under Adjustments.  My SELECT button maybe is bad.  I had a terrible time getting the display to display the items under Adjustment.  Finally, I got to the Adjustments screen and thought I was going to easily get to Headlights.  I SCOLLED down and it went through the menu until I got to Headlight.  It would not bring up Headlight and instead went to the top  to start over again.  I tried several times.  What am I doing wrong?
Thank you in advance.

The engine has to be running

[Coconut]

I have updated the downloadable PowerPoint file "How to Navigate the Trophy Menu"
to Version 3, to include a note that the Headlight can only be adjusted with the Engine running. 

[AZRider]

With it being about 108 last night after reading the response by digital, I got up early this morning and made the change.  I am having trouble with my Select button but the reason I couldn't access Headlight was because the bike has to be running as the last three to respond have said.  But by keeping the Select button on and off, on and off, on and off, I finally made the change.  And, I was about 4 numbers off which was about 4-5 inches on the wall mark.  So thanks for all the responses.  I don't feel I'm too old to ride it but I sure might be  too old to use the display. 

[Saddle Tramp]

You might want to spray a little electrical contact cleaner into your switches while operating them. If they are corroded, that might clean them out.

[AZRider]

I will try that.  Thanks Saddle Tramp.  Makes sense to try it.