Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: Power Connection for GPS  (Read 6568 times)

0 Members and 1 Guest are viewing this topic.

Offline TwoBrothersBusa

  • Trophy Pro
  • ***
  • Posts: 124
    • View Profile
  • Bike: 2013 TrophySE
  • City / Town: McDonald
  • Country: USA
Power Connection for GPS
« on: October 24, 2013, 12:24:45 AM »
I've seen some say they use the USB in the locked pocket and I know there is a dedicated plug for the Zumo 660 GPS.

What kind of plug is the dedicated plug and what is the voltage?
How do you that use the locked pocket USB port get the physical wire into the box?

Pics if you have them and thanks for any info!
2008 Hayabusa - Gone but not forgotten
2007 GSXR 1000 - track bike
2013 Mustang GT - Street Ride
1990 CBR1000F - the old girl

Offline Coconut

  • Trophy God
  • *****
  • Posts: 8770
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
Re: Power Connection for GPS
« Reply #1 on: October 24, 2013, 09:46:44 AM »
As far as I know ( but haven't checked ) the dedicated "clean" power supply for the Sat Nav is 12 volts.

The plug is in the same location as the dedicated Sat Nav Audio Jack Plug -
behind and slightly below the left hand mirror housing / fairing :




There is a Triumph Accessory Part - A9938122 that connects to the plug.
Attached document shows a picture of it.



Offline chrisb1

  • Ex Member
  • *
  • Posts: 134
    • View Profile
  • Country: test
Re: Power Connection for GPS
« Reply #2 on: October 24, 2013, 10:36:39 AM »
*Originally Posted by Coconut [+]
As far as I know ( but haven't checked ) the dedicated "clean" power supply for the
There is a Triumph Accessory Part - A9938122 that connects to the plug.
Attached document shows a picture of it.
my dealer ordered the part as part of my initial purchase, didn't follow the instructions and wired the satnav across the battery ( and missed the audio connect ) when i diagnosed this i corrected it without the part (basically i crimped the connections) and it works fine ....at the time i didn't fancy the 20 mile ride to get the bit. i have since run said dealer thru the set up so hopefully no one else will suffer this in aberdeen....but don't worry about the part just crimp it!

Offline TwoBrothersBusa

  • Trophy Pro
  • ***
  • Posts: 124
    • View Profile
  • Bike: 2013 TrophySE
  • City / Town: McDonald
  • Country: USA
Re: Power Connection for GPS
« Reply #3 on: November 07, 2013, 12:29:39 AM »
Wired into this connector today when I had the fairing off checking the coolant issue.  it is twelve volts at this plug.  It is switched with the ignition.

Thanks for the pics.

*Originally Posted by Coconut [+]
As far as I know ( but haven't checked ) the dedicated "clean" power supply for the Sat Nav is 12 volts.

The plug is in the same location as the dedicated Sat Nav Audio Jack Plug -
behind and slightly below the left hand mirror housing / fairing :




There is a Triumph Accessory Part - A9938122 that connects to the plug.
Attached document shows a picture of it.


2008 Hayabusa - Gone but not forgotten
2007 GSXR 1000 - track bike
2013 Mustang GT - Street Ride
1990 CBR1000F - the old girl

Offline Iain

  • Trophy Pro
  • ***
  • Posts: 120
    • View Profile
  • Bike: Trophy SE
  • City / Town: Stornoway
  • Country: UK
Re: Power Connection for GPS
« Reply #4 on: November 08, 2013, 04:29:00 AM »
So do I need this Triumph accessory part when I get my Zumo 660 or can I do without it?
Honda VFR 2002
Sprint ST 2007
Sprint ST 2009
Sprint GT 2011
Trophy SE 2013

Offline cropbiker

  • Trophy God
  • *****
  • Posts: 4933
  • Midlands biker
    • View Profile
  • Bike: Triumph Trophy SE
  • City / Town: Worcester
  • Country: UK
Re: Power Connection for GPS
« Reply #5 on: November 08, 2013, 06:25:40 AM »
You CAN manage without but it means splicing wires into the wiring loom somewhere or attaching direct to the battery. Splicing wires in on a can bus system can often cause problems.
Triumph Trophy! Not for every Tomaz, Dieter or Herman!🇬🇧

Offline Iain

  • Trophy Pro
  • ***
  • Posts: 120
    • View Profile
  • Bike: Trophy SE
  • City / Town: Stornoway
  • Country: UK
Re: Power Connection for GPS
« Reply #6 on: November 08, 2013, 04:48:41 PM »
I see.I've spliced wires often enough before but given that I've a new machine I'd better get the part.They could use any excuse to invalidate your warranty.
Honda VFR 2002
Sprint ST 2007
Sprint ST 2009
Sprint GT 2011
Trophy SE 2013

Offline Neil_AU

  • Trophy Member
  • **
  • Posts: 48
  • Two Up Touring
    • View Profile
  • Bike: Trophy SE 2013
  • City / Town: Townsville
  • Country: Australia
Re: Power Connection for GPS
« Reply #7 on: November 08, 2013, 04:54:47 PM »
I have ordered the 660 GPS mount, are you saying this doesn't come with the required wiring and has to be ordered separately ???  The dealer made no mention of it.
Suzuki Bandit 250F
Yamaha FJR 1300 Gen2
Triumph Trophy SE 2013 oh yeah.

 



tweedy-bunch