Hi,
I can't give you a full answer, as I haven't dismantled the front of my bike that far,
( yet ) but there are a few things you can check :
The radio is directly underneath the storage box under the riders seat.
Remove the four small "Torx" screws and lift the storage box out -
you will see the aerial cable plugged into the top of the radio module -
it is a simple push fit into the socket - make sure it is fully inserted.
Below the aerial and behind the upper side cowling, there is an earthing eyelet
attached to one of the body mounting screws -
make sure it is clean and tight with a good path to earth. ( See attached Photo - eyelet is circled ).
NOTE : Refer to the main
"How to Remove fairing ... etc " post, Para's 11, 12 & 13,
if you need information on how to remove the indicator and upper side cowl.
There is another connection somewhere behind the headlamp where the "Antenna Flylead"
plugs into the main audio harness - this is the one I haven't accessed yet to check it is a good connection.
See attached images of the Antenna Flylead, and the radio end of the main audio harness,
which shows the Antenna cable ( circled ) entering the main audio harness.
Hope these help - I seem to have the same issue in that removing the antenna
does not have a significant effect on the quality of radio reception, which is not particularly good !
