Where to mount my Gerbing Permanent Dual Temp Controller?

[Stoney]

Has anyone mounted the dual permanent controller from Gerbing yet?  I have them on my Burgman 650, and it's by far more convenient to use than the belt-clip version.  I'd prefer a spot easily reached with my left hand, obviously.  With several panels off the bike while installing the GPS mount, it didn't seem like there's much room up front, might have to mount them down by the left side relay box.  Each controller needs close to 2" of clearance below the surface.  Any ideas???

 

[madshep]

We don't need heated kit ..... We're in England!!

 

[Fireman73163]

I hope this might be of service to you or give you an idea or two on your install , I have had no problems at all .

https://www.triumph-trophy.com/index.php/topic,1363.0.html

[Stoney]

Originally Posted by Fireman73163

I hope this might be of service to you or give you an idea or two on your install , I have had no problems at all .

https://www.triumph-trophy.com/index.php/topic,1363.0.html

I did see that while searching the forum, but it's completely different than what I have. The first photo below is the kit as it comes out of the box, second is a photo of what you see as far as the control knobs & indicator lights are concerned after installation (photo obviously not a TT).

I'm looking to reserve an area on the small painted panel behind the knee for the 2 power ports for the heated gear cables.