Cannot find head set 2

[FROSTY]

Hello ladies & gents, my pair of Sena 10's arrived today.
I can talk to a second helmet and she can hear me.
I can hear my IPhone 5 through the USB port.
However, l cannot find headset 2 or devise 1 for that matter.
My screen ONLY show's headset 1 & devise 2, am l missing a secret function.
All I want to do is the following -
1. Talk to the wife between helmets,
2. Listen to music via iPhone 5 and the USB port for both helmets, &
3. Listen to GPS - Zumo 660 from main helmet.

Just a bit confused and have no manuals for the bike yet.

Any help in a simple formate would be appreciated.

cheers,

[cropbiker]

I don't believe there is a headset 2 channel on the Bluetooth module.

I don't believe you will get the functionality you are looking for as Bluetooth only allows the pairing of 1 device per channel

[Mad Dog]

Have SMH10 with rider headset and mobile phone paired to bike.  Upgraded to latest firmware and both rider and pillion can listen to music connected to USB port.  Note after upgrading to latest firmware you need to re pair the headset.

[FROSTY]

Mad dog can you explain how to re pair the headsets to each other as l cannot find the process to do this?
Any help would be appreciated.

[Mad Dog]

Apologies I should have been clearer as you should only need to re-pair the headset to the bike.  If you need to repair the two headsets the process is:
1.  Turn on the two headsets to be paired.
2. Press and hold the jog dial of the headsets for approx. 5 seconds, until red LED's on both units start to flash rapidly.  If attached you will hear a voice prompt saying "Intercom pairing"
3. Tap the jog dial of any one of the two headsets and wait until LED's on both headsets turn blue and intercom connection is established.

If the pairing process is not completed within one minute, the headsets will return to standby mode.

[Coconut]

Frosty,

To save duplication, please refer to my reply in your other post re "HEADSET 1 and "DEVICE 2" :
"Bike only shows Headset 1 and Device 2 - Am I missing something ?" 

[Trophy 59]

I pair my headset to the bike as Headset 1, and the wife's to the bike as headset 1 as well. The headsets pair together in the usual way, and the bike bluetooths music to both headsets. To talk to each other, press the jog dial on one helmet or the other so the channel opens, to return to the music, hit the jog dial again.

Worked well, until I had to start listening to Enya etc,  so now I have unpaired her from the bike and she can find her own music via her own phone bluetooth.

[freefallnz]

Well SWMBO has the oposite problem... She dislikes my running commentary on the f..ktards on the road around me...

She has unpaired herself & no longer talks to me 

Blessings in disguise?

Well at least not as many pee breaks......