Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: Driver and Passenger Intercom Help Needed  (Read 1651 times)

0 Members and 1 Guest are viewing this topic.

Offline CaptDenny

  • Trophy Member
  • **
  • Posts: 36
  • The Blue Beast
    • View Profile
  • City / Town: Fort Collins CO
  • Country: USA
Driver and Passenger Intercom Help Needed
« on: November 14, 2014, 05:02:17 am »
When riding two up, my wife and I both wear Shuberth C3 helmets with the integrated bluetooth.  We both normally sync to our own Iphones to listen to music or one of us links the the TT's bluetooth for radio, etc.

The problem is that we dont have connectivity to each other's helmet and therefore, no intercom.

Is there a way to sync our helmets together and be able to sync to our Iphones or the bike's bluetooth simultaneously?

Ideas?

CaptDenny
2004 Sprint 1050
2007 Rocket III
2008 Speedmaster
Next - New 2015 Trophy SE

Offline Coconut

  • Trophy God
  • *****
  • Posts: 9418
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
Re: Driver and Passenger Intercom Help Needed
« Reply #1 on: November 14, 2014, 10:52:09 am »
Extracts of the Schubert SRC System User Manual

PAIRING A MOBILE PHONE:

1. Turn on your phone and make sure its Bluetooth® function is activated.
    Turn on your headset by pressing the Mobile Phone Button for at least three seconds resulting in three blue flashes.
2. With the SRC-System™ turned ON, press and hold the Mobile Button for at least six seconds
    until the Red and Blue Lights begin rapidly alternating.
3. Search for Bluetooth® devices on your phone by following the phone’s instructions.
    Consult your phone’s User Manual for more information.
4. After a few seconds the phone will list “SRCS” (incl. its software version) as a discovered device.   
    Select it and follow your phone’s instructions to accept the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset will begin flashing slowly in Blue.

TO PAIR ONE OF THE C3'S TO THE TROPHY AUDIO SYSTEM, FOLLOW THE SAME PROCESS AS ABOVE.
( Substituting "Trophy Audio System" for "Mobile Phone in the instructions ! )

TWO ‑ WAY INTERCOM

Using two SRC-System™ headsets

1. While both headsets are turned OFF, turn them ON by pressing and holding the Mobile Buttons
    until the Blue Lights flash three times.
2. Make sure that both headsets are now flashing slowly in Blue.
3. Choose an available CHANNEL you wish to use to pair the headset (CHANNEL “A” or CHANNEL “B”)
4. On the SRC System™ headset, press and hold the assigned CHANNEL BUTTON (“A” or “B”) for at least six seconds
    until the headset’s BLUE or RED Light begins flashing rapidly, indicating it is in Intercom Pairing mode.
    (See Intercom Channel Table for Pairing LED indication for each CHANNEL).
5. Repeat Step 3-4 for the second SRC-System™
6. Within a few seconds, both headsets will show a solid light for two seconds,
    indicating that the two headsets are now paired, connected and ready for use.

Hope that helps  :028: