Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: HOW TO : Set up and save a "Profile" ( Trophy SE )  (Read 2768 times)

0 Members and 1 Guest are viewing this topic.

Offline Coconut

  • Trophy God
  • *****
  • Posts: 9263
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
HOW TO : Set up and save a "Profile" ( Trophy SE )
« on: August 23, 2015, 07:31:45 pm »
A "Profile" can store the following settings :

  • Triumph Electronic Suspension ( TES ) Mode - 3 Modes to select from : SPORT, NORMAL & COMFORT
  • TES Loading - 3 Modes to choose from : 1 UP, 1 UP + Luggage & 2 UP
  • Triumph Traction Control ( TTC ) - 2 Modes to choose from : ON or OFF
  • Headlight - vertical position anywhere between lowest and highest settings.

It can be useful to store 2 different Profiles if, for example, you regularly switch between riding Solo,
when you might select Profile 1 that is set to :
TES Mode - NORMAL / TES Loading - 1 UP /  TTC On / Headlight set for your preference,
and riding with  a Pillion where you might have Profile 2 set to :
TES Mode - Comfort / TES Loading - 2 UP / TTC ON / Headlight set lower to compensate.

To set the Parameters saved in one of the Profiles :

  • With the motorcycle stationery and in Neutral - Press and hold the Select button until SETTINGS is displayed
  • Scroll to PROFILE 1 or PROFILE 2 and press Select
  • Scroll to EDIT and Press Select to display the ADJUSTMENT Screen
  • Scroll to the Item to be adjusted, e.g TES Mode and press Select
  • Scroll to the desired setting for the item being adjusted and press Select to save that setting and exit
  • Repeat the process for other desired settings ( TES Loading, TTC On or Off and Headlight adjustment )
  • When adjusting the Headlight 1 "bar" is for lowest beam and 10 "bars" is for highest beam.
  • Select EXIT from the Adjustment Screen

After setting the Parameters, either Profile can be loaded by :
  • the motorcycle stationery and in Neutral - Press and hold the Select button until SETTINGS is displayed
  • Scroll to PROFILE 1 or PROFILE 2 and press Select
  • Scroll to LOAD and press Select - that Profile will be loaded.
  • Scroll to Exit and press Select.

Note that any adjustments / alterations made to TES / TTC / Headlight after Loading a Profile,
do not change the settings saved in that Profile, but are saved as the "Current" profile.








« Last Edit: October 25, 2015, 11:26:34 am by Coconut »

 



tweedy-bunch