Author [NL] [FR] [ES] [DE] [SE] [IT] Extra LED running lamps  (Read 6020 times)

0 Members and 1 Guest are viewing this topic.

  • Offline 1215   gb

    • Trophy Pro  ‐    115
    • ***
    • Topic Author

    Offline 1215

    • Trophy Pro
    • ***
    • Topic Author
    • Posts: 115
    • the tigers are resting!!
    • Bike: Trophy SE
    • City / Town: East Yorks
    • Country: gb
    Extra LED running lamps
    on: Sep 21, 2015, 05.53 pm
    Sep 21, 2015, 05.53 pm
    Anyone aware of any issues with the Canbus set up of the TTSE (is it canbus??) by adding a couple of 4 or 5 LED lamps in the radiator void to increase visibility.
    four wheels move the body,
    two wheels move the soul.

    Trophy SE/ Street Triple/ Tiger 800/ Yamaha WR450 crosser

  • Offline Zebraranger   us

    • Trophy Pro  ‐    430
    • ***
      #1

    Offline Zebraranger

    • Trophy Pro
    • ***
    • Posts: 430
    • Bike: 16 Moto Guzzi Griso
    • Country: us
    Re: Extra LED running lamps
    Reply #1 on: Sep 21, 2015, 07.58 pm
    Sep 21, 2015, 07.58 pm
    I'm not sure about the front, but I did add an additional 4 LED brake strobe light to the back of the Trophy as an additional visibility light when braking and it was no issue. Other members here have added driving lights without any problems, maybe one will chime in.

  • Offline Gordon3xBBB   gb

    • Ex Member
    • Trophy Pro  ‐    492
    • *
      #2

    Offline Gordon3xBBB

    • Ex Member
    • Trophy Pro
    • *
    • Posts: 492
    • Bike: 2012 Trophy SE
    • City / Town: Stroud
    • Country: gb
    Re: Extra LED running lamps
    Reply #2 on: Sep 21, 2015, 08.13 pm
    Sep 21, 2015, 08.13 pm
    When I added a pair of Daylight Running LED bars to the Chin Piece under the Headlamp and had them connected to the Sidelight wiring she wouldn't fire up or start....so I opted to power them independently from the rear of the Glove Box Power supply socket, which works a treat...

  • Offline BigD

    • Trophy Pro  ‐    338
    • ***
      #3

    Offline BigD

    • Trophy Pro
    • ***
    • Posts: 338
    • Bike: Triumph Trophy SE
    • City / Town: Columbus (Dublin) OH
    Re: Extra LED running lamps
    Reply #3 on: Sep 21, 2015, 09.25 pm
    Sep 21, 2015, 09.25 pm
     I powered mine thru a relay with power to the relay coming from the power supply for the GPS.   At that particular time that was the easiest place for me to grab power.  Next time the bike is apart I'll probably go back and re-feed  the relay from the power supply to the trunk.

    No issues.

  • Offline carl_in_az

    • Trophy Member  ‐    18
    • **
      #4

    Offline carl_in_az

    • Trophy Member
    • **
    • Posts: 18
    • Bike: 2015 Blue Trophy
    • City / Town: scottsdale
    Re: Extra LED running lamps
    Reply #4 on: Oct 01, 2015, 09.50 pm
    Oct 01, 2015, 09.50 pm
    I added two LED strips up front running up and down in parallel with the fairing. Used 3M molding tape and some plastic right angle door edging paint flat black. I also added Hyperlites LEDS under my headlights and changed my headlights out to LEDS.
    On the back, I add a flasher for the brake light. I also added 12 inch LED strips on both lower bags running up and down with pull apart wiring of amber and red for the brakes and turn signals.
    So far the front LEDS have been in place for over a year in both snow and 121 degrees with no problem. I just installed the back LEDs today.

  • Offline w8d4it   us

    • Trophy God  ‐    5340
    • *****
      #5

    Offline w8d4it

    • Trophy God
    • *****
    • Posts: 5340
    • Bike: 2013 Triumph Trophy
    • City / Town: Houston Texas
    • Country: us
    Re: Extra LED running lamps
    Reply #5 on: Oct 01, 2015, 10.37 pm
    Oct 01, 2015, 10.37 pm
    I did the same as Zebraranger did with LED.  I've had no issues
    Proudly Riding Triumph Since 1968
    2013 Triumph Trophy SE
    2001 Sprint 955 ST

  • Offline azgman   us

    • Trophy Master  ‐    726
    • ****
      #6

    Offline azgman

    • Trophy Master
    • ****
    • Posts: 726
    • Addicted to curves
    • Bike: 2014 Trophy
    • City / Town: Casa Grande
    • Country: us
    Re: Extra LED running lamps
    Reply #6 on: Oct 01, 2015, 11.39 pm
    Oct 01, 2015, 11.39 pm
    Aux LED tail light and flood lights in the front... no issues
    Serial BMW rider

  • Offline twowheeladdict   us

    • Trophy Pro  ‐    437
    • ***
      #7

    Offline twowheeladdict

    • Trophy Pro
    • ***
    • Posts: 437
    • Bike: 2014 trophy se
    • City / Town: Tennessee
    • Country: us
    Re: Extra LED running lamps
    Reply #7 on: Oct 02, 2015, 12.55 am
    Oct 02, 2015, 12.55 am
    I powered my SkeneDesign amber lights off the Position light and also used that connection to power the relay that runs my MondoLights MM10 LED running lights.


     



    tweedy-bunch