Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: Ignition Switch Wiring Failures  (Read 24984 times)

0 Members and 1 Guest are viewing this topic.

Offline briandca

  • Trophy Member
  • **
  • Posts: 68
    • View Profile
  • Bike: 2015 Trophy
  • City / Town: The villages Fl
  • Country: USA
Re: Ignition Switch Wiring Failures
« Reply #128 on: November 09, 2019, 11:09:15 PM »
I have got the switch hardware all apart except how do you remove the switch from the metal housing?  Where it looks like where the fastners would go it looks like the bottom of a bolt.  A little help would be appreciated.  Thanks   

Online earthman

  • Trophy Master
  • ****
  • Posts: 1771
    • View Profile
  • Country: UK
Re: Ignition Switch Wiring Failures
« Reply #129 on: November 09, 2019, 11:21:03 PM »
*Originally Posted by briandca [+]
I have got the switch hardware all apart except how do you remove the switch from the metal housing?  Where it looks like where the fastners would go it looks like the bottom of a bolt.  A little help would be appreciated.  Thanks

I've not had to do this job myself so can't really advise, maybe posting a picture at the stage you are at would help?

Have you seen the pictures in reply no.4 on this thread, maybe they will be of some help??

https://www.triumph-trophy.com/index.php/topic,8101.0.html

Offline Coconut

  • Trophy God
  • *****
  • Posts: 7970
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
Re: Ignition Switch Wiring Failures
« Reply #130 on: November 10, 2019, 08:30:03 AM »
briandca:

The Ignition Lock is secured with two Security "Shear Bolts".
the heads of which break off when tightened up on fitting.
( See image below - Item No.11 )
The Bolts are Part Number T3330324 and are size M6 X 1.0 X 20.

To remove the lock these have to be carefully drilled out.

If you are buying a new Lock, check that the bolts are included in the kit.

There are also two Stainless Steel elongated M6 washers ( Item 12 )
under the bolts ( T3550436 ) that can be re-used.

I presume you've had the wiring pulled apart, and that's why you're having to do this work.

Have you seen my other Topic here : Ignition Switch Wiring Failures - List of Members affected ! ?

I am in the process of taking this matter up with Triumph, and the UK DVSA,
and am trying to collate details of all Trophy motorcycles that have suffered the failure,
and it would be really appreciated if you could send me the following information
by Private Message ( Personal details will not be posted on the Forum ) :

  • Name
  • Address
  • Trophy Registration / VIN Number
  • Year of manufacture
  • Approximate Mileage when fault occurred
  • Approximate date of failure
  • Was this reported to Triumph ?
  • Was this reported to DVSA ( or the equivalent Department of Motoring outside the UK ) ?

Cheers  :821:


 


« Last Edit: November 12, 2019, 09:07:39 PM by Coconut »
Smiles are infectious,and they are FREE,
so if you see someone without one, give them one of yours :-)

Offline briandca

  • Trophy Member
  • **
  • Posts: 68
    • View Profile
  • Bike: 2015 Trophy
  • City / Town: The villages Fl
  • Country: USA
Re: Ignition Switch Wiring Failures
« Reply #131 on: November 10, 2019, 09:22:27 PM »
Thank you very much.  makes sense now