Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: wiring color for alarm scorpio  (Read 2425 times)

0 Members and 1 Guest are viewing this topic.

Offline cisco

  • Trophy Junior
  • *
  • Posts: 10
  • Res Firma Mistecere nescit
    • View Profile
  • Bike: triumph trophy se
  • City / Town: santiago
  • Country: test
wiring color for alarm scorpio
« on: October 24, 2015, 11:28:50 pm »
Hi to all
i am trying to connect a new alarm scorpio sr i 900 is really good alarm
but the question, if anyone can answer it is
1░anybody have experience installing this kind of alarm , if this affect the motorcycle or the ECU or anything?
2░ the wire that i need in the trophy for the scorpio alarm are four and i have
    turn signal + right = in the trophy is Yellow = Offside ( Right ) Indicator +ve
    turn signal + left =in the trophy Yellow / Green = Nearside ( Left ) Indicator +ve
    tail light  +=in the trophy is Red  = Tail Light & Number Plate +ve
     ground  -=in the trophy is Black = Stop & Tail & Indicator & Number Plate -ve
is this information correct for the for the trophy 2015 se
 thank you in advance for your help because i am little confussed about where to connect this cables     





« Last Edit: October 25, 2015, 11:07:42 am by cisco »
Fortitudine Vincimus

Offline Coconut

  • Trophy God
  • *****
  • Posts: 9493
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
Re: wiring color for alarm scorpio
« Reply #1 on: October 25, 2015, 12:13:26 pm »
Hi cisco,

I don't know if this will help much, but here goes :

Firstly, if you are confused about making those connections.
then I would suggest you carefully think about whether
the installation is within your personal capabilities.

The coloured wires you mention are the colours of the wires that are used within the rear light unit,
as mentioned and pictured in my post here : HOW TO: add read LED Stalk lights, HOWEVER the main wiring harness wiring uses different coloured wires that terminate in a connector socket which the rear light unit plugs into.

For the main harness wiring to the indicators the wiring colours are :
Front & Rear Left Indicator +ve = Green/Red
Front and Rear Right Indicator +ve = Green/White

It will all depend where you are going to make the wiring connections for your alarm.
( I used the connections within the rear light unit so that I did not disturb any of the main wiring harness ).

I do not have any knowledge or experience of the Scorpio sr i 900 alarm system,
or why it needs a connection to the  Tail Light circuit, but I would recommend that you do NOT
make this connection at the rear end of the Trophy, until you know what it does -
Is it picking up a feed from that wire, or is it supplying power to switch the Tail Light ON ?

If it's supplying power, and if this is while the motorcycle is being ridden,
the extra current could be detected on the Brake Light circuit
which could inhibit operation of the Cruise Control.

I had a look at the on-line Installation instructions but they don't really help,
so I would submit an enquiry to their technical support department,
asking what the purpose of the connection is etc.


Cheers  :821:


Offline cisco

  • Trophy Junior
  • *
  • Posts: 10
  • Res Firma Mistecere nescit
    • View Profile
  • Bike: triumph trophy se
  • City / Town: santiago
  • Country: test
Re: wiring color for alarm scorpio
« Reply #2 on: October 25, 2015, 04:50:02 pm »
hey thanks dude  :062: really the advice that you gave me
have been really useful
the scorpio alarm i tink that is the best but even in that way your recommendation is great about the tail light
today i will try to connect it with the code colors that you gave me for the main harness in, in my other motorcyle a thunderbird i did the installation without problem but it was the same problem know very well the code colors
again thanks for your help
Fortitudine Vincimus

Offline cisco

  • Trophy Junior
  • *
  • Posts: 10
  • Res Firma Mistecere nescit
    • View Profile
  • Bike: triumph trophy se
  • City / Town: santiago
  • Country: test
Re: wiring color for alarm scorpio
« Reply #3 on: October 25, 2015, 08:00:03 pm »
hi dude
me again thanks for your response
a question when you talk about main harness
of what side are  you talking about?
the left side where are the fuses or the right side where is the ntouch box
i post photos
thanks in advance for your help
Fortitudine Vincimus

Offline Coconut

  • Trophy God
  • *****
  • Posts: 9493
    • View Profile
  • Bike: 2017 Trophy SE
  • City / Town: South Birmingham
  • Country: UK
Re: wiring color for alarm scorpio
« Reply #4 on: October 25, 2015, 08:22:12 pm »
They are the wire colours from the Wiring Diagram.

If you remove the spring clip ( arrowed below ) from the single nut under the rear seat,
and then remove that nut - which secures the rear light unit .....



You can then pull the light unit out and you will find the grey plastic connector block
that the wiries from the light unit plug into ....



The "bike side" of that connector is the main harness,
and should have the wires coloured as previously described  :028:

Cheers  :821:




« Last Edit: July 28, 2017, 08:00:59 pm by Coconut »