Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: Using the topbox power supply  (Read 1484 times)

0 Members and 1 Guest are viewing this topic.

Offline nigelrtaylor

  • Ex Member
  • *
  • Posts: 56
    • View Profile
  • Country: Not disclosed
Using the topbox power supply
« on: January 19, 2016, 02:44:46 pm »
I currently have my Autocom powered from the rear power socket. However this is only live when the engine is running. I understand that the topbox power supply is live with the ignition on. I don't have a topbox fitted and wanted some information on how to access that powersupply. PS. on the Explorer it is accessed via a wiring loom connector in teh rear tail unit.

Any help gratefully received.

Offline brenchley

  • Trophy Pro
  • ***
  • Posts: 483
    • View Profile
  • Bike: 2014 Trophy SE
  • City / Town: NE Florida
  • Country: USA
Re: Using the topbox power supply
« Reply #1 on: January 19, 2016, 03:09:31 pm »
Hello Nigel,

You're correct in that the top box is live with the ignition on.

The wiring harness connector for the top box on the Trophy is, likewise, located at the rear of the bike.  There is also a relay required to be installed at the main harness relay block to activate power for the top box harness.

Install instructions for the top box:

Also, if you search this forum, you'll find more useful information.
IBA #69644