Quick turn throttle

[IMDMAN]

Is there something out there to make a quick turn throttle for the trophy. 

[Coconut]

I'm not aware of one for the Trophy.

A few Members have mentioned they think the Throttle is already quite sensitive,
especially in the lower range at very slow speed, what are you trying to achieve ?

[Gordon3xBBB]

Do some right wrist flexibility exercises...?

[trophied]

Maybe his GSXR explains his motivation. 

[RocketSteve]

A small improvement for me would be a slightly stronger return spring.

Just a tad more resistance would then make it feel a bit more like a conventional throttle...

[Volfy]

TTSE is true Throttle-By-Wire.  There is no throttle cable, so the throttle position sensor is built into the twist grip assembly.  To do a quick turn (1/5, 1/8 turn, etc.) mod, you will have to come up with a mechanism that somehow translates the quick turn to match the calibrated limits at the TPS.

IIRC, there are also limit switches at each end of the throttle travel, which will complicate any mod.

In short... not too likely anybody would come out with a throttle mod.

[AZBob]

Originally Posted by RocketSteve

A small improvement for me would be a slightly stronger return spring.

Just a tad more resistance would then make it feel a bit more like a conventional throttle...

Yuck, no thanks. I like the weakest spring possible.

[IMDMAN]

It sucks that it's such a long turn to get full throttle.  I don't think it's possible to get full throttle in one grip.  1/4 to 1/3 turn would b great