Author [NL] [FR] [ES] [DE] [SE] [IT] Topic: Installing GPS mount. Fell out removing fairing. Where do they go?  (Read 3009 times)

0 Members and 1 Guest are viewing this topic.

  • Offline JerseyRider

    • Trophy Pro  ‐    119
    • ***
    • Topic Author

    Offline JerseyRider

    • Trophy Pro
    • ***
    • Topic Author
    • Posts: 119
    • Persistence and determination are omnipotent!
    • Bike: 2017 Trophy SE
    • City / Town: Jersey
    Installing GPS mount. Fell out removing fairing. Where do they go?
    on: Mar 21, 2018, 12.30 pm
    Mar 21, 2018, 12.30 pm
    Gentleman and Ladies if there are any out there:

    I am installing the GPS mount and have all the fairing and body parts removed.  These fell to ground in the shop when removing the fairing.  I can''t seem to find where they go.  They are not the pieces that join the fairing at the bottom.  I got those out after figuring how to pull with my finger nail while backing out plastic screw.

    Can't seem to see where these little buggers came from?  Any help would be much appreciated.  I am trying to finish this job as the 10" of snow falls here in Jersey today! :190:

    Yes, I am a BIKEAHOLIC and No, I don't need help!

  • Online trophied   us

    • Trophy God  ‐    4773
    • *****
      #1

    Online trophied

    • Trophy God
    • *****
    • Posts: 4773
    • Bike: 2013 Trophy SE
    • City / Town: New Braunfels, Tx
    • Country: us
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #1 on: Mar 21, 2018, 01.08 pm
    Mar 21, 2018, 01.08 pm
    Not sure since I haven't looked at mine in a long time, but they appear to be the scrivets that are used in the very bottom of the fairing pieces under the engine.  If I recall correctly there are 2 of them.  Bike Bandit shows them as item 18 of the lower left fairing schematic.  They are listed as Rivet, screw type and they just push in through the holes underneath the very bottom of the fairing to hold the lower center of it in place.  I have extras because they are plastic and at some point they will refuse to hold (for me anyway) any longer even with careful removal and reinstallation.  Here's the link to see them: https://www.bikebandit.com/oem-parts/2013-triumph-trophy-se/o/m155159?a=3#sch786247
    Hope this helps.
    One of the Founding Members of the Twisted Trophies

  • Offline lemuriano

    • Trophy Pro  ‐    200
    • ***
      #2

    Offline lemuriano

    • Trophy Pro
    • ***
    • Posts: 200
    • Bike: 2014 Trophy SE
    • City / Town: Jacksonville, Fl
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #2 on: Mar 21, 2018, 01.16 pm
    Mar 21, 2018, 01.16 pm
    Hope this help
    An apprentice in life, perhaps with the spirit of a Café Racer
    IBA #60953

  • Offline JerseyRider

    • Trophy Pro  ‐    119
    • ***
    • Topic Author
    • #3

    Offline JerseyRider

    • Trophy Pro
    • ***
    • Topic Author
    • Posts: 119
    • Persistence and determination are omnipotent!
    • Bike: 2017 Trophy SE
    • City / Town: Jersey
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #3 on: Mar 21, 2018, 01.26 pm
    Mar 21, 2018, 01.26 pm
    Thanks guys but they are not the #18 scrivets.  I got them out without damaging them.  These are smaller and do not appear to be used in conjunction with screws but rather are the push type? 

    I can now inspect the diagram as you have reminded me that the parts diagrams are available online.  I should be able to track them down that way!  Thanks much though for your quick reply! 
    Yes, I am a BIKEAHOLIC and No, I don't need help!

  • Offline brenchley   us

    • Trophy Master  ‐    535
    • ****
      #4

    Offline brenchley

    • Trophy Master
    • ****
    • Posts: 535
    • Bike: 2021 Honda Gold Wing
    • City / Town: NE Florida
    • Country: us
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #4 on: Mar 21, 2018, 01.45 pm
    Mar 21, 2018, 01.45 pm
    Good morning, JerseyRider - could they possibly be part number T3010052, used in the headlight (4) and/or in the cooling section (8).

    www.bikebandit.com/oem-parts/2014-triumph-trophy-se-headlight/o/m155995sch807413

    www.bikebandit.com/oem-parts/2014-triumph-trophy-se-sump-fittings/o/m155995sch807376
    Former 2014 Blue TTSE
    IBA #69644

  • Offline skiprat

    • Trophy Pro  ‐    121
    • ***
      #5

    Offline skiprat

    • Trophy Pro
    • ***
    • Posts: 121
    • Bike: 2012 Trophy A1
    • City / Town: Middlesbrough
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #5 on: Mar 21, 2018, 10.26 pm
    Mar 21, 2018, 10.26 pm
    Some of the sponge shapes behind the panels are held on with plastic rivets like those.

  • Offline Jubeeprince

    • Trophy Member  ‐    87
    • **
      #6

    Offline Jubeeprince

    • Trophy Member
    • **
    • Posts: 87
    • Bike: 2016 Trophy SE
    • City / Town: Eldersburg
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #6 on: Mar 22, 2018, 08.23 pm
    Mar 22, 2018, 08.23 pm
    #29 in diagram one behind each mirror. There should be plastic screws that go in them.

    OEM# 29PFKL1215782

    http://www.worldoftriumph.com/triumph_motorcycle_parts_locator?block_01=&block_02=100061468-1-2&block_03=621910

    Cheers,

    Steve

  • Offline 1675   gb

    • Trophy Master  ‐    941
    • ****
      #7

    Offline 1675

    • Trophy Master
    • ****
    • Posts: 941
    • Bike: Trophy
    • City / Town: Spennymoor
    • Country: gb
    Re: Installing GPS mount. Fell out removing fairing. Where do they go?
    Reply #7 on: Mar 22, 2018, 08.42 pm
    Mar 22, 2018, 08.42 pm
    I agree with Steve on this. Definietely not the lower fairing scrivets as I have mine in bits at the minute to replace the sat nav cable and didn't remove the lower fairing. If it was a bit warmer I would have got it together again!