Author [ES] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [SE] [FI] [NO] Topic: Install on the buttons of the pineapples led light  (Read 12028 times)

0 Members and 2 Guests are viewing this topic.

Offline louping77

  • Trophy Member
  • **
  • Posts: 59
    • View Profile
  • Bike: trophy1200se 2016
  • City / Town: collegien
  • Country: France

Offline digital

  • Trophy Master
  • ****
  • Posts: 1191
  • Trophy SE 1200
    • View Profile
  • Bike: digital
  • City / Town: Barcelona
  • Country: Spain
Re: Install on the buttons of the pineapples led light
« Reply #105 on: April 04, 2020, 03:30:22 PM »
Yes, it looks good and is very similar to the three I have installed.

louping77, I can't guarantee if it works the same.

I explain:
The sensor has 2 ways to make it work, one is for the relay to work when light enters the sensor, and another would be the opposite, the relay works when the sensor stops receiving light.

Those that I have installed, the inverter mode is done by removing the leg of a resistance and placing it in another place.

I suppose if it will do the same function. Or rather, it will only be one way, it will work when it stops giving light to the sensor. which is exactly what interests us in this case.

As I say, it is similar to the ones I have installed.

The price of € 3.69 from. So it's very good. I seem to remember that the ones I installed cost around € 22 per unit.

Only motorcyclists know why dogs stick their head out the car window.


Offline digital

  • Trophy Master
  • ****
  • Posts: 1191
  • Trophy SE 1200
    • View Profile
  • Bike: digital
  • City / Town: Barcelona
  • Country: Spain
Re: Install on the buttons of the pineapples led light
« Reply #106 on: April 04, 2020, 03:41:42 PM »
louping77, What color is your TTSE?
Only motorcyclists know why dogs stick their head out the car window.


Offline louping77

  • Trophy Member
  • **
  • Posts: 59
    • View Profile
  • Bike: trophy1200se 2016
  • City / Town: collegien
  • Country: France
Re: Install on the buttons of the pineapples led light
« Reply #107 on: April 05, 2020, 11:18:52 AM »
Hi digital
the colour of my TTSE is black..

i suppose  once installed the led light of the sensor
should be protect …?
thx

Offline digital

  • Trophy Master
  • ****
  • Posts: 1191
  • Trophy SE 1200
    • View Profile
  • Bike: digital
  • City / Town: Barcelona
  • Country: Spain
Re: Install on the buttons of the pineapples led light
« Reply #108 on: April 05, 2020, 12:53:24 PM »
If you mean what is itself, the cell (sensor). No, since if you put covers on it, little light will enter.

On the other hand, since you comment on the led, I also discarded the led that carries the printed circuit and took from the place of the led, two cables soldered to a led and approached the instrument panel, along with 11 other LEDs to carry. The 12 leds are of high luminosity.

So I check when the keyboard lights are on or off.



Only motorcyclists know why dogs stick their head out the car window.


Offline louping77

  • Trophy Member
  • **
  • Posts: 59
    • View Profile
  • Bike: trophy1200se 2016
  • City / Town: collegien
  • Country: France
Re: Install on the buttons of the pineapples led light
« Reply #109 on: April 05, 2020, 04:52:57 PM »
nice job
yes i was speaking about the cell, you fitted it on the left side cover..
it doesn t protect from water ?
i checked the sensor that we talking about ,i didnt see
a led bulb on printed circuit …sorry for that
anyway in case i wish install a led signal
where do i sold it please?
thx

Offline digital

  • Trophy Master
  • ****
  • Posts: 1191
  • Trophy SE 1200
    • View Profile
  • Bike: digital
  • City / Town: Barcelona
  • Country: Spain
Re: Install on the buttons of the pineapples led light
« Reply #110 on: April 05, 2020, 09:00:33 PM »
No, louping77, nothing happens to the sensor with the water.

The only thing is that the hole to insert the sensor is as fair as possible to let the sensor in.

That the sensor does not dance inside the hole, what it will do is not allow water to enter the legs of the sensor.

Also, put some silicone rubber on the back.

I have been looking at the photo of the circuit that you put yesterday and even enlarging the photo, I do not see led, it does not mean that it does not have led, it could be that it has a very reduced (SMB). In that case, don't touch it.

If you want to put one to show when it starts, no problem. High brightness led with a resistance of 1k. The colors of this resistance are: brown, black and red.

That, I will already make a scheme so that you do not have any problem when installing it.
Only motorcyclists know why dogs stick their head out the car window.


Offline digital

  • Trophy Master
  • ****
  • Posts: 1191
  • Trophy SE 1200
    • View Profile
  • Bike: digital
  • City / Town: Barcelona
  • Country: Spain
Re: Install on the buttons of the pineapples led light
« Reply #111 on: April 06, 2020, 01:50:46 AM »
I leave you the wiring diagram that I made tonight. For the connections between the sensor and the LEDs, which will be inserted in the three keyboards, in the case of the TTSE. The non-SE, would only be two keyboards.



regars
Francis
Only motorcyclists know why dogs stick their head out the car window.