DID YOU KNOW ?? ( Triumph Trophy 2012 onwards ) .....

[Coconut]

Did you know ? .....

..... Only 5,380 Triumph Trophy ( 2012 onwards ) Motorcycles were produced and sold worldwide.
That's 513 Standard Models, and 4867 SE Models. ( Source : Triumph Motorcycles Ltd 03/10/17 ).


..... New Trophy motorcycles were provided with a spare Lock Barrel
operated by the same key, for use if a Top Box was purchased. 
This was usually placed into the Tool Roll under the Pillion seat.
( ... and sometimes in the Glove Box ).


..... The Pillion Seat has four small strap loops on the underside
that can be used with Bungee cords or ties to help secure bags etc.


..... The Pillion Seat also has a recess on the underside to store
the Owners Handbook, Audio Handbook and Service Record Booklet.


..... Underneath the Seats, the undertray is shaped to accept storage
of the Triumph security accessory "D" Lock.


..... The Front Brake and Clutch Master Cylinders mounted on the Handlebars, have threaded holes
( M10 x 1.25 Right Hand thread ) for Mirrors - the holes are covered with rubber blanking plugs.


...... You can check the Headlamp bulbs are working without starting the engine.
Simply hold the Clutch Lever IN and turn the Ignition to ON.


..... You can display any stored Fault Codes on the Instrument Panel.
Hold the Scroll Up and "i" Buttons in when switching on the Ignition,
and keep them held in until the Instruments have completed their Sweep.
A Diagnostics screen will be displayed listing any stored Fault Codes
( "P0000" = No Codes stored ). Scroll up or down if more than One Code is stored,
and switch off the Ignition when done.


..... You can display the Audio Software Version on the Instrument Panel.
( Latest versions are 1.04E for US & Canada, and 1.04A for everywhere else ).
The radio must be OFF before turning ON the Ignition, so turn the Ignition ON,
then turn the Radio OFF ( it it is ON ) by pressing and holding
the "Volume-" Button until "RADIO OFF" is displayed.
Switch OFF the Ignition, wait for everything to shut down,
then Switch the Ignition ON again, and wait for the Instruments to finish their Sweep.
Press the "P" Button and hold it in until a DIAGNOSTICS Screen appears.
Scroll down to S/W Version and press the "i" Button.


..... When you turn the Ignition Switch past the OFF position to the "Parking Lights" Position,
as well as the Front and Rear Parking Lights being switched ON,
the Brake Light will illuminate if either Front or Rear Brake is operated,
and the Horn will still work when the Horn Button is pressed !


Feel free to add any more "DID YOU KNOW ....." comments !

[Ebenezer]

So far more Trophy’s sold than I knew! Great posting too. I’ll see if I know some items to add.

Henk

[Novocastrian]

Interesting that BSA made 5,897 Rocket Three bikes. A very similar number....and I have one of those as well   

[HACKLE]

Coconut, thanks for your information re Trophy items. I "usually" consult with Mr Google if I need to know anything, and if "he", or should that be "she" or maybe "they" can't give me the answer, then "my all knowing good wife can". 

[rpeters549]

So I have one of only 4800 produced.  Does that make it collectible?
Probably not...

[earthman]

..... You can display the Audio Software Version on the Instrument Panel.
( Latest versions are 1.04E for US & Canada, and 1.04A for everywhere else ).
The radio must be OFF before turning ON the Ignition, so turn the Ignition ON,
then turn the Radio OFF ( it it is ON ) by pressing and holding
the "Volume-" Button until "RADIO OFF" is displayed.
Switch OFF the Ignition, wait for everything to shut down,
then Switch the Ignition ON again, and wait for the Instruments to finish their Sweep.
Press the "P" Button and hold it in until a DIAGNOSTICS Screen appears.
Scroll down to S/W Version and press the "i" Button.

On the subject of the radio being off/on, I generally leave mine on all the time, I've pressed the "i" button and the scroll down by mistake only to see a line of info briefly displayed. I were actually looking for any P codes at the time, should have remembered that it's scroll up for that. 

[GarminDave]

Thanks for this very interesting post, I especially like:

" You can check the Headlamp bulbs are working without starting the engine.
Simply hold the Clutch Lever IN and turn the Ignition to ON.
"
I often start mine in the garage when I don't remember which lamp needs replacing, and to check after replacement, filling the garage with smelly fumes, now I won't have too.

[Trophy Moderator]

NOTE : Comments not relevant to this Topic have been Split
and used to create a New Topic :

General Discussion : Demise of the Trophy and possible alternatives


Trophy Moderator