Triumph Trophy

Main Trophy Boards => Lighting, Electrical, and Wiring => Topic started by: gneissrockett on June 06, 2015, 08:18:15 pm

Title: New Driving Lights on my Trophy
Post by: gneissrockett on June 06, 2015, 08:18:15 pm
Hi
I purchased some Clearwater LED driving lights to put on the Trophy, the instructions say to attach to the high beam wire, but they do not say what wire that is.  I have done a search for wiring diagrams but did not see anything about the lighting diagram for a 2013 TTSE.  Can any of you help identify which is the correct wire I can attach to.

Thanks and have a great day riding and staying safe.

Kim
Title: Re: New Driving Lights on my Trophy
Post by: Saaz on June 07, 2015, 12:13:59 am
I used something like one of these http://www.ebay.com/itm/2-PCS-H4-9003-Ceramic-Wire-Harness-Plug-Cable-Headlights-Connector-Extension-/221378565475 (http://www.ebay.com/itm/2-PCS-H4-9003-Ceramic-Wire-Harness-Plug-Cable-Headlights-Connector-Extension-/221378565475) to go between the bulb and OEM plug, and attached the wire for the driving light relay to the extension harness. So it can all go back to original.

The wiring is like this http://www.schematic.me/3-prong-plug-wiring-diagram/14/h4-halogen-headlight-wiring-diagram/ (http://www.schematic.me/3-prong-plug-wiring-diagram/14/h4-halogen-headlight-wiring-diagram/)
Title: Re: New Driving Lights on my Trophy
Post by: gneissrockett on June 07, 2015, 12:27:09 am
Thanks I'll check that out, mostly I like knowing which is the high beam wire.

 :152: