Triumph Trophy

Main Trophy Boards => Audio, Sat Nav, and Intercom => Topic started by: Paulvt1 on July 10, 2013, 02:45:37 pm

Title: That went well.
Post by: Paulvt1 on July 10, 2013, 02:45:37 pm
Had my old Zumo 220 lying around from the Multistrada (it was a freebee) so bought the Triumph mount and set about the bike with a sense of dread and optimism. 4 hours later - including a sausage sarnie stop - the bike is back together, all bits accounted for and working correctly.
I'm getting more and more impressed by the bike as i go along. Nearly all the pins were the same size, the panels all fit together well and the underlying finish is good. Very car like in it's unit construction. Good stuff.
Title: Re: That went well.
Post by: Tlrtone on July 10, 2013, 03:32:51 pm
good stuff, gives me confidence to do mine now!
  :028:

did you follow the PDF to the letter, or any hints or tips you can share?   :183:
Title: Re: That went well.
Post by: Paulvt1 on July 10, 2013, 04:53:02 pm
I followed the guide on the PDF - but as i had a different power cable, i probably took apart more stuff than was needed.
Just work logically. Screen off first, pull the mirrors toward you to access the pod inners and away you go. There are a couple of plastic screws and their matching mounts in the pods that hold the facia to the outer. Be careful not to drop them.

Title: Re: That went well.
Post by: cropbiker on July 10, 2013, 06:07:15 pm
Cheers Paul!

Glad all went well for you!